Our site is not fully compatible with Internet Explorer. We strongly suggest using Google Chrome, Firefox, Safari, or Edge.

Staging Control

March 30, 2020

PRODUCTS YOU WILL NEED:

👉 STAGING / BRAKE CONTROL SOLID STATE RELAY

👉 SEALED RELAY HOLDER

1. Wire the relay like below.

2. Open the FTMANAGER software and go to Map Options to enable Staging Control.

3. Next, find drag racing features in the quick access panel and click Staging Control / Transbrake, select your button activation mode and output activation mode.

4. Now go to your Inputs Screen and select the inputs you want to use for your Transbrake / 2-step button and your staging button.

5. Go to your Outputs Screen and assign your transbrake output to the output you wired your staging control rely to.

6. Once this is all configured, you can go back to the staging control feature and adjust your Staging Intensity and Frequency to make the car stage smoothly when the staging button is pressed.

* Each car and transmission is different. However using the values 20% and 15 HZ is a good starting point to work from.

Also in Articles

Support FuelTech Employees: Help Us Rebuild Lives After Devastating Floods in Rio Grande do Sul

May 09, 2024

Rob Garcia XDA ProXtreme Motorcycle Drag Racing - New Race Program including FuelTech, Innovative Performance Racing, and William Cavallo

May 06, 2024

Rob Garcia Racing rises from the ashes of a devastating shop fire in November 2022, rebuilding their XDA ProXtreme Motorcycle Drag Racing program stronger than ever with FuelTech, Innovative Performance Racing and William Cavallo.